Main technical performance indicators
- Maximum test force: 1kN
- Test force working range: 0.4% ~ 100% of the maximum test force
- The relative error of the indication value of the test force is not greater than : ± 1% , and the error of the indication value below 200N is not greater than: ±2N
- When the test force is long, the relative error of the indication value is automatically maintained, and the relative error is not greater than: ±1%F N
- Measured maximum friction torque: 2.5Nm
- The relative error of the friction torque indication value is not greater than: ±2%
- Friction sensor: 50N
- Friction arm distance: 50mm
- Spindle stepless speed change system: 1r/mi ~ 2000r/min
- The spindle speed error above 100r/min is not greater than: ±5r/min
- The spindle speed error below 100r/min is not greater than: ±1r/min
- Special deceleration system: 0.05r/min ~ 20r/min
- Test medium: oil, water, mud, abrasive, etc.
- Heater working range: room temperature ~ 200 ℃ (260 ℃ )
- Temperature measurement control accuracy: ±2℃
- Testing machine spindle taper: 1:7
- The maximum distance between the main shaft of the testing machine and the lower sub plate: ≥75mm
- Testing machine spindle control mode: manual control, time control, revolution control , friction torque control
- Testing machine time display and control range: 0s～9999min
- Test revolution display and control range: 0～9999999
- Spindle motor rated power: 1kW
- Dimensions of the testing machine <L×B×H>: 700mm×680mm×1560mm
- Test machine net weight: 400kg