| Model | QC-501M1F | QC-502M1F | QC-503M1F |
|---|---|---|---|
| Max. capacity | 300 kN | 200 kN | 100 kN |
| Units | Force: gf, kgf, lbf, N, kN, ozf, tonf(SI), ton(long), tonf(short) Pressure: Kpa, Mpa, psi, bar, mm-Aq, mm-Hg | ||
| Force Resolution | 1/100,000 (31 bits) | ||
| Load cell accuracy | ±1% under the range 2-100% of the load cell capacity (There are optional load cells with higher accuracy) | ||
| Test Stroke (w/o grip) | 1100 mm | ||
| Stroke resolution | 0.0001 mm | ||
| Space between columns | 550 mm(680mm, 800mm Optional) | ||
| Speed range | 0.2~330 mm/min (Can be set by computer software ) | 0.2~375 mm/min (Can be set by computer software) | |
| Speed accuracy | ±1% | ||
| PC-Port | RJ45(TCP/IP)[Software optional] | ||
| Data sampling rate | Maz.400Hz | ||
| Motor type | Servo Motor | ||
| Frame Stiffness | 562 kN/mm | 171 kN/mm | |
| Feature | ※Automatic reading of load cell feature information ※Automatic reading of displacement sensor feature information ※force display, displacement display, time display, stress display and strain display ※External analog input (2-channel simultaneous reading of voltage or current) ※Test force automatically zero ※Test force self-defined calibration ※Break detection ※Automatic return ※Force overload protection | ||
| Power Supply | 3 phase 200~240VAC，30 A | 3 phase 200~240VAC，20 A | Single phase 200~240 VAC, 10 A |
| Dimension of Machine | 140 x 66 x 235cm | 120 x 60 x 220cm | |
| Dimension of Machine | 1250 kg | 800 kg | |
(1) Displayer
1. Adopted with 7- inch of TFT Color touch screen.
2. Chinese, English, Japanese, Three different languages can be selected.
3. Data Display: Force, Stress, Torque, Displacement, Time.
4. Test setting, can set test speed, test direction, automatic position return, breaking point machine stop.
5. Data analysis, can read the maximum force, internal force, breaking point force and so on.
6. Can be stand-alone calibration.
7. Various machine shutdown conditions setting (force, displacement, time, elongation).
8.Can be restored to the original factory state.
9. Unit selection can be Metric unit, Imperial units.
10.Over-travel, overload protection and overtime machine stop.
11.Can store up to 50 data, USB storage data function.
12. Support multiple sets of signal sources.
(2) Extensometer
|  | |||
| QC-557 Short extensometer Suitable for elongation below 50% | QC-551 Long travel extensometer Suitable for samples with over 20% elongation | |||
Tab Conte1. Data sample rate faster can be set up to 400Hz.
2. Operation method: By keyboard and mouse control test, can also through up and down button to adjust the fixture position.
3. Compatible with Window 7 /8 /10 system.
4. Software has multi-languages with Chinese, English, Japanese, Korean, Spanish and Polish display
5. Operating mode: TCP/IP interface, two-way transmission, the computer directly control the machine action.
6. Can import multiple test data display simultaneously.
7. Unit selection can be Metric unit and Imperial units.
8. Form flexibility, self-planning information analysis.
9. Data name can be self-set and can self-defined formula.
10. Test Screen can be selected data display, graphic display or simultaneous display.
11. Data processing: store, call, list, statistical comparison, etc.
12. Graph X-Y axis physical quantity adjustment, graph-specific mark, interval mark, slope and son on.
13. Test tensile, compression, bending, peeling, spring and other tests.
14. Software protection: Overload, over -displacement, over-time protection.
15. Variety of test actions,，Ex. hold tensile (compression)、10 grades of the actions.
16. Modularization of specimen setting, providing easy to set specimen.
17. Modularization of test conditions to reduce artificial setting negligence and error.
18. Key data capture, can set the upper and lower limits of test data specifications.
19. Support multiple sets of I / O signals, increase testing mechanism.nt
| (1)Software interface | (2)Report |
 |
|
*Cometech reserves ultimate modification right of product specification