Model | QC-50AM2F | QC-500M2F |
---|---|---|
Max. Capacity | 600kN | 500kN |
Units | Force: gf, kgf, lbf, N, kN, ozf, tonf(SI), ton(long), tonf(short) | |
Force Resolution | 1/100,000 (31 bits) | |
Load cell accuracy | ±1% under the range 2-100% of the load cell capacity (There are optional load cells with higher accuracy) | |
Test stroke(w/o grip) | 1500mm | |
Stroke resolution | 0.0001mm | |
Space between columns | 550mm | |
Speed accuracy | ±1% | |
Speed range | High speed mode | |
0.02 ~ 330 mm/min | ||
Low speed mode | ||
0.0002~2 mm/min | ||
PC-Port | RJ45(TCP/IP) | |
Data sampling rate | 1200Hz (Max.) | |
Hardware safety protection | upper limit, lower limit, emergency stop button | |
Motor type | Servo Motor | |
Feature | ※Automatic reading of load cell feature information | |
Power Supply | 3 phase 200V-240 V, 5A | |
Dimension of Machine | 155 x 85 x 295 cm | |
Weight of Machine | Around 2350kg |
(1) Grip& Load Cell
Each test will require different test grips and accessories for the plastics, metal, biomedical, composite, elastomer, component, automotive, aerospace, textile and other applications industries.
★Tensile grip
★Compression grip
★Bending grip
★Peeling/Tearing grip
★Film friction grip
★Load cell
(2) Displayer
1. Adopted with 7- inch of TFT Color touch screen
2. Chinese, English, Japanese, Three different languages can be selected.
3. Data Display: Force, Stress, Torque, Displacement, Time
4. Test setting, can set test speed, test direction, automatic position return, breaking point machine stop.
5. Data analysis, can read the maximum force, internal force, breaking point force and so on.
6. Can be stand-alone calibration.
7.Various machine shutdown conditions setting (force, displacement, time, elongation).
8.Can be restored to the original factory state.
9.Unit selection can be Metric unit, Imperial units
10.Over-travel, overload protection and overtime machine stop
11.Can store up to 50 data, USB storage data function.
12.Support multiple sets of signal sources.
(3) Extensometer
QC-557 Short extensometer Suitable for elongation below 50% | QC-551 Long travel extensometer Suitable for samples with over 20% elongation |
1. Data sample rate faster can be set up to 1200 Hz
2. Operation method:Full-computerized control to run the test or Jog button control
3. Compatible with Window 7 /8 system
4. Software has multi-languages.
5. Interface for TCP/IP
6. Multi-curves display and real-time plot
7. Various units of measurement are available
8. Flexible form to manage database.
9. Free to name the data file.
10. Testing screen is selective to display data, graph at the same time.
11. Data processing: file saving, setting loading, report printing and data comparing.
12. Graph display: strain v.s. elongation, strain v.s. time and so on.
13. Tensile test, compression test, bending test, peel test…
14. Software protection: Overload, over -displacement ,over-time protection
15.Variety of test actions, ex.reciprocation, creep, hold tensile (compression), test pause, slip test, etc.
16.Modularization of specimen setting, providing easy to set specimen.
17.Modularization of test conditions to reduce artificial settingnegligence and error.
18.Key data capture, can set the upper and lower limits of test data specifications
19.Support multiple sets of I / O signals, increase testing mechanism
(1)Software interface | (2)Report |
*Cometech reserves ultimate modification right of product specification.
Ulasan
Belum ada ulasan.