Colorimeter Portabel HD-X003-1
Fitur Produk:
HD-X003-1 adalah spektrofotometer bola terintegrasi portabel, dan kinerja serbagunanya dapat digunakan untuk berbagai aplikasi praktis.
★bodi portabel, kompak, ringan dan bergaya.
★Operasi tampilan Cina, sensor presisi tinggi.
★dengan data yang kompatibel dengan CM-2600d (Ø8) dan CM-2500d.
Colorimeter Portabel HD-X003-1
Penggunaan: Cocok untuk plastik / karet, cat, pencelupan tekstil, pencetakan, kulit, mobil dan sebagainya. Perangkat lunak manajemen kualitas warna dapat terhubung, CCM (sistem pencocokan warna komputer).
Colorimeter Portabel HD-X003-1
Spesifikasi Teknis:
| Light / Observing System | d / 8 (light scattering, 8 degree viewing angle) with SCI (specular component included) / SCE (not including specular reflection) synchronous measurement function. (Meet CIE No.15, ISO 7724/1, ASTME1164, DIN5033 Tei17, JIS Z8722 Condition c standards.) |
| Integrating sphere size | Ø52mm |
| Sensor | silicon photodiode array (dual 40 elements) |
| Splitting means | Diffraction grating |
| Wavelength Range | 360nm—740nm |
| Wavelength spacing | 10nm |
| Spectral half band width | 10nm |
| Reflectance range | 0-175%, resolution: 0.01% |
| Light source | 2 pulsed xenon lamp |
| Measuring time | Approximately 1.5 seconds |
| Minimum measurement interval | 3 seconds (at 23 ℃) |
| Battery performance | At 10-second intervals of about 1000 times (with alkaline batteries) (at 23 ℃) |
| Measurement / illumination area | Ø8mm/Ø11mm |
| Repeatability | Spectral reflectance: Standard deviation less than 0.2% (360 to 380nm: standard deviation of 0.4% or less)
Chromaticity value: Standard deviation within ΔE * ab 0.08 (after correction on the board at 10-second intervals white calibration plate is measured 30 times) |
| Phase difference | ΔE * ab of 0.4 or less (SCI) (based on 12 BCRA Series ll whiteboard, on average, when compared at 23 ℃was measured by the host body values) |
| Language patterns | English / Chinese |
| Measurement mode | Single / average (Auto mode: 1-8 times / manual mode) |
| Port | Meet the RS-232C standard |
| Observer | 2/10 degrees |
| Observation light source | A, C, D50, D65, F2, F6, F7, F8, F10, F11, F12 (using two light sources can be calculated simultaneously) |
| display | Spectral values / charts, color values, color values, “pass / fail” decision, the relative gloss |
| Color space / colorimetric data | L*a*b*，L*C*h，Yxy、XYZ、MI、ΔE*ab、CMC（1：1）、CMC（2：1）、CIE94、CIE DE2000、WI(ASTM E313)、YI(ASTM D1925)
|
| Data sets can be stored | 1,700 (each data set by a pair of SCI / SCE data members) |
| Tolerance judgment | Chroma Tolerance |
| Power supply | AA batteries (X 4), AC adapter |
| Size | 69 (W) X96 (high) X193 (L) mm |
| Weight | Approximately 670g (including whiteboard / batteries not included) |
| Operating temperature / humidity range | 5 ℃to 40 ℃, relative humidity 80% or less (at 35 ℃), without condensation |
| Storage temperature / humidity range | 0 ℃to 45 ℃, relative humidity 80% or less (at 35 ℃), without condensation |
| Standard accessories | White Calibration Plate: CM-A145 |
| Ø8mm Target box: CM-A146 | |
| RS-232C cable (D-sub9-pin, for IBM, PC / AT): IF-A16 | |
| AC Adapter AC-A17 | |
| AA (R6) alkaline batteries X 4 | |
| Optional accessories | Zero Calibration Box: CM-A32 |
| Hard Carton: CM-A148 | |
| Dust Cover Kit: CM-A149 | |
| Cover: CM-A152 | |
| Color Data Software “SpectraMagic NX”: CM-S100W | |
| Printer cable (D-sub9 pin for serial link): CR-A75 |