Mesin tipe meja QC-508M2F memiliki kapasitas hingga 2kN. Ini menawarkan lingkungan pengujian yang tenang dan hasil pengujian yang akurat. Pada mode stand-alone, dapat melakukan uji tarik, uji kompresi, uji tekuk dan sebagainya. Sistem transmisi memerlukan sedikit perawatan bahkan setelah digunakan beberapa saat. Roda tangan yang presisi mengontrol pergerakan genggaman dalam skala kecil. Dengan alat ini, pengguna dapat menggerakkan genggaman ke posisi yang tepat. Sinyal gaya dipancarkan dan diterima secara instan untuk mencegah kelebihan beban. Port dicadangkan untuk sinyal yang berada di luar mesin untuk pengoperasian yang lebih fleksibel.
Industri: Karet, Plastik, Kertas, Tekstil, Logam, Kayu, Tape, Elektron, Paket, Medis, Konstruksi
| Model | QC-505M1F |
|---|---|
| Max. capacity | 50 kN |
| Units | Force: gf, kgf, lbf, N, kN, ozf, tonf(SI), ton(long), tonf(short) Pressure: Kpa, Mpa, psi, bar, mm-Aq, mm-Hg |
| Force Resolution | 1/50,000 (31 bits) |
| Load cell accuracy | ±1% under the range 2-100% of the load cell capacity (There are optional load cells with higher accuracy) |
| Test stroke(w/o grip) | 1100mm |
| Stroke resolution | 0.0001mm |
| Space between columns | 420mm(550mm、680mm、800mm Optional) |
| Speed range | 0.2~ 600mm/min（Can be set by computer digital） |
| PC-Port | RJ45(TCP/IP)[Software Optional] |
| Data sampling rate | Max. 400Hz |
| Hardware safety protection | upper limit, lower limit, emergency stop button |
| Motor type | Servo Motor |
| Frame Stiffness | 120 kN/mm |
| Feature | ※Automatic reading of load cell feature information ※Automatic reading ofdisplacement sensor feature information ※force display, displacement display, time display, stress display and strain display ※External analog input (2-channel simultaneous reading of voltage or current) ※Test force automatically zero ※Test force self-defined calibration ※Break detection ※Automatic return ※Force overload protection |
| Power Supply | Single phase 200 ~ 240VAC，8A |
| Dimension of Machine | 90× 60 × 195 cm |
| Weight of Machine | 280 kg |
(1) Displayer
1. Adopted with 7- inch of TFT Color touch screen.
2. Chinese, English, Japanese, Three different languages can be selected.
3. Data Display: Force, Stress, Torque, Displacement, Time.
4. Test setting, can set test speed, test direction, automatic position return, breaking point machine stop.
5. Data analysis, can read the maximum force, internal force, breaking point force and so on.
6. Can be stand-alone calibration.
7. Various machine shutdown conditions setting (force, displacement, time, elongation).
8. Can be restored to the original factory state.
9. Unit selection can be Metric unit, Imperial units.
10. Over-travel, overload protection and overtime machine stop.
11. Can store up to 50 data, USB storage data function.
12. Support multiple sets of signal sources.
(2) Extensometer
|  | |||
| QC-557 Short extensometer Suitable for elongation below 50% | QC-551 Long travel extensometer Suitable for samples with over 20% elongation | |||
| (1)Software interface | (2)Report |
 |
|
*Cometech reserves ultimate modification right of product specification.
