Spesifikasi
Spesifikasi
| Model | D1 Controller |
|---|---|
| Power force(DC) | 6V |
| Control signal input | Two sets of input signal for selection Stress sensor: 4~20mA Force sensor: 1.0mV/V、1.5 mV/V、2.0 mV/V、3 mV/V、4 mV/V |
| Two sets of Encoder signal input | |
| Input signal: upper limit, lower limit, emergency stop, go up, go down, full speed | |
| Control signal output | One set of breakpoint output signal |
| Communication Interface | TCP/IP RJ45 Connecting Cable |
| Load cell Revolution | 1/10,000 |
| Encoder signal voltage | 5V |
| Encoder signal mode | Single- ended (Open Collector)、differential square wave(Line Driver) |
| Display panel | 7 inche of TFT Color touch panel |
| Language selection | Chinese, English, Japanese |
| Data assess | Can use USB to proceed with data access (can export test data to Excel for further data analysis) |
| Specified software is optional for data access | |
| Data sampling rate | 3、5、20、50、100、500、1200 |
| Interface function | Data Display: Force , Stress, Torque, Displacement, Time |
| Graph Display : Force, Displacement, Time | |
| Date Analysis : maximum force, deformation percentage at maximum force point, stress at maximum force point, percentage of elongation at maximum force point, force at break point, deformation percentage at break point, stress at break point, percentage of Elongation at specified break point, interval average load, Max. Force…..so on. | |
| Unit changeable (Metric system or imperial system) | |
| Calibration setting | Calibrated parameter setting can be provided |
| Can be used on various capacity of load cell and no need to recalibration after replacement. |
Ulasan
Belum ada ulasan.