Tester ini diaplikasikan pada pengujian bahan penyangga dengan berat standar palu 5kg, tinggi jatuh biasanya 100cm, dapat menghasilkan sekitar 50 joule untuk memukul benda uji secara vertikal. Penguji ini dapat membaca nilai energi sisa yang diserap spesimen setelah tumbukan gaya 50 joule. Umumnya digunakan untuk melindungi personel dan benda-benda canggih, kemampuan menyerap dampak bahan kemasan selama transportasi.
Industri:Peralatan olah raga, bahan pengemas
| Model | QC-636 |
|---|---|
| Maximum test height | 210cm |
| Test counter weight | 5Kg |
| Test capacity | 100J |
| Force sensor | Higher than125kn, Minimum accuracy 1kn, Frequency above 8khz reflect. |
| Feature | 1. A / B two impact ways can be interchanged. 2. Counter weight lifting is adopted electric way. 3. Counter weight is adopted electromagnet adsorption method, during adsorption process with security agencies to protect, counter weight will not release due to power outages and then cause danger. 4. Counter weight working orbit is adopted Linear Slides to decrease resistance. 5. Dedicated software can display related analysis. |
| Accessory | Dedicated software |
| Dimension | 84x56x275cm |
Smooth surface dimension: 40x80mm
Four chamfers radius：r=5mm
Height：180mm
Type A test piece is placed in the form of anvil, a smooth surface, the radius of the hemispherical 50mm
Hammer type: A 60-degree V-type (front R angle 12.5mm)
Height:30.8mm
B type anvil: R=150mm, height is around190mm
