Spesifikasi
ASTM D6055 PLC paket kontrol mesin uji kekuatan penjepit
- Paket mesin uji penjepit
- Hingga ASTM D6055
- kontrol PLC
Perlindungan keamanan
Perlindungan kelebihan beban, perlindungan tegangan lebih & perangkat perlindungan posisi terbatas
Main parameter:
| Specimen shape | Parallelepiped transport package |
| Maximum specimen weight | 600kg |
| Clamping pressure force | According to the transport diagram on the test sample, the operator can add 400-3000Lb (adjustable) pressure force on the corresponding surface. |
| Clamping plate size | Height 48inch X depth 48inch |
| Clamping plate adjustable height | 0～1000mm |
| Clamping plate adjustable width | 200～2000mm |
| Base plate dimension | 2200 X 2100mm |
| Motor | Panasonic Servo Motor |
| Accuracy | within ±5% |
| Clamping plate requirement | Make the two clamping boards flat and non-deform under work condition (2000 Pounds) and make clamping boards’ parallel and clamping board and land vertical. Clamping board is thicker than 25mm. |
| Clamping force rate | 0.25-2.5mm/sec (according ISTA 6- SAMS CLUB) |
| Force corrector | It displays force value and is used to calibrate clamping force. |
| Calibration accuracy | ±1% F.S |
| Device width | Less than 2.5m |
| Weight | approx. 2000kg |
| Power | 220v/ 60Hz |
| Controller: | touch screen type, which can control & display the speed and force |
| Function | the clamp can be up and down |
| Control | Computer controlled type |