Alat Uji Tarik MEGA 1500 Auto Tensile Tester

Fitur Produk

Teknologi Profesional

Mekanisme penggerak sekrup bola dua kolom memastikan presisi tinggi dan kerja instrumen yang stabil
Beberapa mode pengujian tersedia termasuk kekuatan tarik, deformasi, pengelupasan dan sobek, dll. yang dapat memenuhi tuntutan pengujian pelanggan
Tegangan pada perpanjangan yang ditentukan, modulus elastisitas dan tegangan dan regangan dll. dapat dianalisis
Stroke ekstra panjang 1200mm memenuhi kebutuhan pengujian berbagai bahan dengan tingkat deformasi ekstrem
6 stasiun kerja dan penjepit spesimen pneumatik memfasilitasi untuk menguji beberapa spesimen secara bersamaan
Load cell dengan rentang pengujian yang berbeda dan perubahan kecepatan stepless dari 1 hingga 500mm/menit dapat memenuhi persyaratan untuk berbagai kondisi pengujian
Sistem pengontrol komputer tertanam, dengan sakelar membran nyaman untuk pengoperasian instrumen
Perlindungan over-travel multi-level, perlindungan kelebihan beban, pengaturan ulang posisi otomatis, dan peringatan kesalahan cerdas untuk operasi pengujian yang aman
Sistem yang dikendalikan komputer tertanam secara efektif menjamin keamanan sistem dan keandalan manajemen data serta operasi uji
Instrumen dapat dioperasikan dengan satu monitor, satu mouse dan satu keyboard, tidak memerlukan komputer
Sistem ini dilengkapi dengan empat port USB dan dua antarmuka koneksi bersih, yang nyaman untuk ekspansi data
Perangkat lunak operasi profesional mendukung analisis superposisi kurva uji spesimen kelompok dan analisis statistik maksimum, minimum, rata-rata dan standar deviasi hasil pengujian

Standar

Instrumen ini memenuhi beberapa standar termasuk:
ISO 37, ASTM E4, ASTM D882, ASTM D1938, ASTM D3330, ASTM F88, ASTM F904, GB 8808, GB/T 1040.1-2006, GB/T 1040.2-2006, GB/T 1040.3 -2006, GB/T 1040.4-2006, GB/T 1040.5-2008, GB/T 4850-2002, GB/T 12914-2008, GB/T 17200, GB/T 16578.1-2008, GB/T 7122, GB/ T 2790, GB/T 2791, GB/T 2792, GB/T 17590, JIS P8113, QB/T 2358, QB/T 1130

Applications

This instrument is equipped with more than 100 grips for tests of more than 1000 materials. And customization is also available for special material tests. Examples of instrument applications:

Basic Applications
Tensile Test
Test of Tensile Strength and Elongation Rate
Test of Tensile Strength at Break
Tear Resistance Test
Heat Seal Strength Test
90 Degree Peel Test
180 Degree Peel Test
Extended Applications (Additional Accessories Required)
Opening Resistance Test of Combined Covers	Tear Test of ZD – Type Caps
Opening Resistance Test of Oral Liquid Caps	90 Degree Pullout Test of Infusion Bag Caps
Tear Test of Adhesive Binding Books	Tear Test of Adhesives
23 Degree Pullout Test of Bottle Caps	Pullout Test of Closures of Infusion Bags
90 Degree Peel Test	Adhesive Strength Test (hard)
90 Degree Peel Test of Water-soluble Plasters	Opening Resistance Test of Jelly Cups and Yogurt Cups
Adhesive Strength Test (soft)	Pullout Test of Tooth Brush Hair
Peel Test of Flexible Tube Caps	Removal Force of Pipes and Pipe Joints
Pullout Test of Cosmetic Brush Hair	Pullout Test of Rubber Closures
Tensile Strength of Ropes at Break	Separating Force of Protection Films
Peel Test of Cup Films	Tear Test of Heatseal Films
45 Degree Peel Test of Bottle Membranes	Tensile Strength of Zip-lock Bag Mouth
Peel Test of Release Paper	135 Degree Peel Test of Plugs
Unwrapping Force of Adhesive Tapes	Tear Test Using Trouser Method
20 Degree Peel Test	Peeling Grips of Floating Rollers
Eccentric Grips	Wide Sample Grips
Japanese Sample Grips	British Sample Grips

Technical Specifications

Specifications	MEGA 1500
Load Cell Capacity	500N (Standard) 50N, 100N, 250N, 1000N (Optional)
Accuracy	1% FS
Test Speed	1 ~ 500mm/min (Stepless Speed Change)
Number of Stations	6
Number of Specimens	1 ~ 6
Specimen Width	25mm (Standard Sample Grip)
Clamping Way	Pneumatic Specimen Clamp
Stroke	1200 mm
Gas Supply Pressure	0.6MPa ~ 0.7MPa (Outside of Supply Scope)
Port Size	Φ6mm PU Tubing
Instrument Dimension	850 mm (L) x 700 mm (W) x 2030 mm (H)
Power Supply	220VAC 50Hz / 120VAC 60Hz
Net Weight	168 kg

Configurations

Standard Configurations: Instrument, Professional Software, Pedal Switch, LCD Monitor, Keyboard, Mouse, Pneumatic Clamping System, Wireless Data Interface, Wireless Data Module, Micro-printer, Standard Sample Grip (25mm)

Optional Parts: Sample Cutter Set^{Note 1}, High Gain Antenna, Installing Support

Note: 1. The gas supply port of the instrument is Φ6 mm PU tubing;
2. Customers will need to prepare gas supply.

Note 1:
Clamp the whole sample into the sample grips of the 6 stations, then 6 specimens can be made by using the sample cutter set at a time. The specimen width is 15mm.